Corundum has historically been used as an abrasive, but it is most famous as the mineral of ruby and sapphire.
Article by: Hobart M. King, Ph.D., RPG
What is Corundum?
Corundum is a rock-forming mineral that is found in igneous, metamorphic, and sedimentary rocks. It is an aluminum oxide with a chemical composition of Al2O3 and a hexagonal crystal structure.
The mineral is widely known for its extreme hardness and for the fact that it is sometimes found as beautiful transparent crystals in many different colors. The extreme hardness makes corundum an excellent abrasive, and when that hardness is found in beautiful crystals, you have the perfect material for cutting gemstones.
Natural and synthetic corundum are used in a wide variety of industrial applications because of their toughness, hardness, and chemical stability. They are used to make industrial bearings, scratch-resistant windows for electronic instruments, wafers for circuit boards, and many other products.
Made Famous by Rubies and Sapphires
Most people are familiar with corundum; however, very few people know it by its mineral name - instead they know it by the names "ruby" and "sapphire." A gemstone-quality specimen of corundum with a deep red color is known as a "ruby." A gemstone-quality corundum with a blue color is called a "sapphire." Colorless corundum is known as "white sapphire." Corundum of any other color is known as "fancy sapphire."
Properties of Corundum
Corundum is an exceptionally hard and tough material. It is the third-hardest mineral, after diamond and moissanite. It serves as the index mineral for a hardness of nine on the Mohs Hardness Scale.
成人自拍视频Its hardness, high specific gravity, hexagonal crystals and parting are very good diagnostic properties to use in its identification. A summary of the physical properties of corundum is given in the table below.
Physical Properties of Corundum
|Color||Typically gray to brown. Colorless when pure, but trace amounts of various metals produce almost any color. Chromium produces red (ruby) and combinations of iron and titanium produce blue (sapphire).|
|Streak||Colorless (harder than the streak plate)|
|Luster||Adamantine to vitreous|
|Diaphaneity||Transparent to translucent|
|Cleavage||None. Corundum does display parting perpendicular to the c-axis.|
|Specific Gravity||3.9 to 4.1 (very high for a nonmetallic mineral)|
|Diagnostic Properties||Hardness, high specific gravity, hexagonal crystals sometimes tapering to a pyramid, parting, luster, conchoidal fracture|
|Uses||Historically used as an abrasive. Specimens with pleasing colors have a long history of gemstone use.|
Geologic Occurrence of Corundum
Corundum is found as a primary mineral in igneous rocks such as syenite, nepheline syenite, and pegmatite. Some of the world's most important ruby and sapphire deposits are found where the gems have weathered from basalt成人自拍视频 flows and are now found in the downslope soils and sediments.
Corundum is also found in metamorphic rocks in locations where aluminous shales or bauxites have been exposed to contact metamorphism. Schist, gneiss, and marble成人自拍视频 produced by regional metamorphism will sometimes contain corundum. Some of the sapphires and rubies of highest quality, color, and clarity are formed in marble along the edges of subsurface magma bodies.
成人自拍视频Corundum's toughness, high hardness, and chemical resistance enable it to persist in sediments long after other minerals have been destroyed. This is why it is often found concentrated in alluvial deposits.
成人自拍视频These deposits are the most important source of rubies and sapphires in several parts of the world. Traditional sources of alluvial rubies and sapphires include Burma, Cambodia, Sri Lanka, India, Afghanistan, Montana, and other areas. In the past few decades, several parts of Africa, including Madagascar, Kenya, Tanzania, Nigeria, and Malawi, have become important producers of ruby and sapphire.
Hardness and Use as an Abrasive
The extreme hardness of corundum makes it especially useful as an abrasive. Crushed corundum is processed to remove impurities and then screened to produce uniformly sized granules and powders. These are used for grinding media, polishing compounds, sand papers, grinding wheels, and other cutting applications.
Some problems with using natural corundum as an abrasive are that the deposits are usually small, irregular in shape, and the corundum is of variable quality. They are not reliable sources of consistent-quality material needed to run a manufacturing process. Synthetic corundum, produced using calcined bauxite, has become a more reliable source with more consistent properties. It has replaced natural corundum in most manufactured products.
Emery stone is a granular metamorphic or igneous rock that is rich in corundum. It is a mixture of oxide minerals, typically corundum, magnetite, spinel and/or hematite成人自拍视频. It is the most common form of natural corundum that has been used to manufacture abrasives.
成人自拍视频The use of emery as an abrasive has declined significantly in the last several decades. It has been almost completely replaced by manufactured abrasives such as silicon carbide. Silicon carbide has a Mohs hardness of 9 to 9.5. It is inexpensive and usually performs better than natural abrasives made from corundum or emery.
Use as a Gemstone
In the gemstone and jewelry market, almost all of the attention goes to a small group of gems known as "the big four": diamond, ruby, sapphire, and emerald. Two of these, ruby and sapphire, are gem corundums.
These most popular gems are highly sought after and have been mined in many parts of the world for thousands of years. Today, millions of rubies and sapphires are required every year to meet the demands of the jewelry market -- from inexpensive commercial stones sold in malls and department stores to spectacular specimens used in designer and custom jewelry. The demand for attractive stones exceeds the abilities of mines to supply. As a result, the prices paid for attractive natural stones have risen to high levels.
When a consumer wants a "ruby ring" or a "sapphire pendant," they are generally not interested in substituting a red spinel, blue iolite, or other attractive gem of similar color. They want "ruby" or they want "sapphire." Retail jewelers, especially those selling pieces and sets for under $500, have been increasingly presenting synthetic or "lab-created" gems alongside the natural stones in their display cases.
The synthetic materials have the same aluminum oxide composition and crystal structure as natural rubies and sapphires. Their color is also produced by the same trace elements (chromium for ruby and iron with titanium for sapphire).
They have the same optical appeal and usually a better physical appearance than similar-size natural stones of the same price. As a result, many consumers now gladly purchase synthetic stones because they receive a more attractive product at a price that they can afford. Over the long term, synthetic gems are likely to continue displacing natural stones from the market, especially in the lower and middle price ranges where consumers are very conscious about price.
There is nothing wrong with selling or purchasing jewelry that contains synthetic gemstones as long as two conditions are met: 1) the seller must disclose the fact that the gemstones are products of man rather than products of nature; and, 2) the buyer clearly understands that the gemstones are synthetic and made by people rather than being products of nature.
"Jewels" and "Crystals" in Watches
In the mid-1800s, watch makers in Switzerland needed tiny bearings that were highly resistant to abrasion. They discovered that they could drill a hole into a tiny piece of corundum and use it for a smooth-running, long-life bearing. The corundum was much harder than the metals used to make the moving parts of a watch, and it was able to stand up to the continuous abrasion without failing. The corundum bearings were called "jewel bearings" after their gemstone counterparts.
成人自拍视频Swiss watches and their "jewel movements" became famous throughout the world for their long life and reliability. In the early 1900s, synthetic corundum bearings replaced natural corundum bearings in most Swiss watches. Synthetic corundum was more uniform than natural corundum as well as being cheaper and easier to obtain. This use of jewel bearings created a positive reputation for Swiss watches that continues to this day - even while mechanical watches are being replaced by digital watches.
Colorless synthetic sapphire is also used in watches. Its durability, vitreous luster, and resistance to being scratched makes it a perfect transparent covering for the face of a mechanical or digital. These clear covers, known as "crystals" protect the face of the watch from impact, dust, moisture and abrasion. Synthetic sapphire has been used for this purpose for nearly 100 years.
成人自拍视频Synthetic corundum is an essential part of many lasers. In fact, the first working laser was a "ruby laser," made by Theodore Maiman at Hughes Research Labs in 1960. It employed a synthetic ruby crystal as the "gain medium." The gain medium is a material in the laser that is the target of an intense burst of light.
That light causes electrons in the gain medium to jump up to a higher energy level causing the emission of photons, which strike other atoms in the gain medium, causing them to be excited and emit more photons. This brief chain reaction produces the very intense light of a laser beam. Lasers are named after the material used as a gain medium, such as "ruby laser" or "titanium sapphire laser" or "YAG laser" (yttrium aluminum garnet).
In just a few decades, lasers have become common items of our society. Tiny lasers are used in CD and DVD players. Lasers are used to cut metal, stone, and other tough materials. Lasers are used to remove tattoos, perform cosmetic surgery, cataract surgery, and LASIK surgery for vision correction.
Other Uses of Corundum
Corundum has many other uses. It is chemically inert and resistant to heat. These properties make it a perfect material for making refractory products such as fire brick, kiln liners, and kiln furniture. Today, these products are usually made with synthetic corundum.
Pure corundum is colorless, transparent, durable, and scratch resistant. Large crystals of clear synthetic corundum are grown, sawn into thin sheets, and then used as the windows of grocery store scanners, watch crystals, aircraft windows, and protective covers for electronic devices.
|Copper Kills COVID-19|
|Mohs Hardness Scale|
Find Other Topics on jpum.net: